Knowledgebase
Knowledgebase:
Manually Setup Uktv2c Web Connect on your 2wire Router
Posted by Graham Swift, Last modified by Graham Swift on 17 December 2015 11:23 AM

 

Manually Setup Uktv2c Web Connect on your 2wire Router

Important: Before you start

Before you change your DNS settings to use Uktv2c Web Connect, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.

​We also recommend that you print this page, in the event that you encounter a problem and need to refer to these instructions.


- Click http://home/ to open the router administration page. If this link does not work then try http://172.16.0.1/ or http://192.168.2.1/.

- Choose Broadband Link tab on Summary page:

- Click on Advanced settings:

- Fill DNS server fields with values from below:
 

Primary: 109.123.81.126
Secondary: 204.12.213.82

 

- Click on Save button.

 

After you have done this it is important that you restart your router - and any other device attached to it.

 

 

 

 

(0 vote(s))
Helpful
Not helpful