Manually Setup Uktv2c Web Connect on your Actiontec R1000H Router
Posted by Graham Swift, Last modified by Graham Swift on 17 December 2015 11:23 AM


Manually Setup Uktv2c Web Connect on your Actiontec R1000H Router

Important: Before you start

Before you change your DNS settings to use Uktv2c Web Connect, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.

We also recommend that you print this page, in the event that you encounter a problem and need to refer to these instructions.

- Open your router administration page (usually , or ).

- Enter your username and password if you configured one. Default user name is admin, password is password.

- Click on Advanced Setup in the top menu and WAN IP Settings on the left

- Select "Static DNS Addresses" radio-button and fill DNS fields with values from below:



- Click on Apply button to save your changes.


After you have done this it is important that you restart your router - and any other device attached to it.





(0 vote(s))
Not helpful