Knowledgebase
Knowledgebase:
Manually Setup Uktv2c Web Connect on your TP-Link Router
Posted by Graham Swift, Last modified by Graham Swift on 17 December 2015 11:23 AM

 

Manually Setup Uktv2c Web Connect on your TP-Link Router

Important: Before you start

Before you change your DNS settings to use Uktv2c Web Connect, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.

We also recommend that you print this page, in the event that you encounter a problem and need to refer to these instructions.


- Open your router administration page ( http://192.168.1.1/).

- Enter your username and password if you configured one.

- Click on DHCP in the left-hand side menu and DHCP Settings

- Fill DNS fields with values from below:
 

Primary: 109.123.81.126
Secondary: 204.12.213.82

 

- Click on Save button to save your changes.

 

After you have done this it is important that you restart your router - and any other device attached to it.

 

 

 

 

(1 vote(s))
Helpful
Not helpful